List of OSMA Sponsored Internal Regulations (NMIs/NHBs) as of 20 May 1994 (20 May 1994 is the Baseline date for Reduction/Conversion activities)

NMI 1040.3C Emergency Preparedness Program

NMI 1103.39E Role and Responsibilities - Associate Administrator for Safety and Mission Assurance

NMI 1152.66B NASA Space Flight Safety Panel

NMI 1152.67A Engineering Management Council

NMI 1156.14L Aerospace Safety Advisory Panel

NMI 1270.2B NASA Quality Policy

NHB 1700.1(V1-B) NASA Safety Policy and Requirements Document

NHB 1700.1(V2) Guidelines for Mishap Investigation

NHB 1700.1(V9) NASA Safety Manual - Fire Protection

NHB 1700.6 Guide for Inservice Inspection of Ground-Based Pressure Vessels and Systems

NHB 1700.7A Safety Policy and Requirements for Payloads Using the Space Transportation System (STS)

NMI 1700.8 Policy for Limiting Orbital Debris Generation

NMI 1710.3D Safety Program for Pressure Vessels and Pressurized Systems

NMI 2410.10B NASA Software Management, Assurance, and Engineering Policy

NHB 2710.1 Safety and Health Handbook - Occupational Safety and Health Programs

NHB 5300.4(1A-1) Reliability Program Requirements for Aeronautical and Space System Contractors

NHB 5300.4(1B) Quality Program Provisions for Aeronautical and Space Systems Contractors

NHB 5300.4(1C) Inspection System Provisions for Aeronautical and Space System Materials, Parts, Components, and Services

NHB 5300.4(1D-2) Safety, Reliability, Maintainability, and Quality Provisions for the Space Shuttle Program

NHB 5300.4(1E) Maintainability Program Requirements for Space Systems

NHB 5300.4(1F) Electrical, Electronic, and Electromechanical (EEE) Parts Management and Control Requirements for NASA Space Flight Programs

NHB 5300.4(1G) NASA Assurance Terms and Definitions

NHB 5300.4(2B-2) Management of Government Quality Assurance Functions for NASA Contracts

NHB 5300.4(3A-2) Requirements for Soldered Electrical Connections

NHB 5300.4(3G) Requirements for Interconnecting Cables, Harnesses and Wiring

NHB 5300.4(3H) Requirements for Crimping and Wire Wrap

NHB 5300.4(3I) Requirements for Printed Wiring Boards

NHB 5300.4(3J) Requirements for Conformal Coating and Staking of Printed Wiring Boards for Electronic Assemblies

NHB 5300.4(3K) Design Requirements for Rigid Printed Wiring Boards and Assemblies

NHB 5300.4(3L) Requirements for Electrostatic Discharge Control (Excluding Electrically Initiated Explosive Devices)

NHB 5300.9 Safety, Reliability and Quality Assurance Provisions for the Office of Aeronautics, Exploration and Technology Centers

NMI 5310.1D NASA Alert Reporting of Parts, Materials, and Safety Problems

NMI 5310.2C Participation in Government-Industry Data Exchange Program (GIDEP)

NHB 5310.3 Procedures for NASA Alert Reporting of Parts, Materials, and Safety Problems

NMI 5320.5C Basic Policy for NASA Space Flight Program Electrical, Electronic, and Electromechanical (EEE) Parts

NMI 5320.6B Implementation of NASA Standard Electrical, Electronic, and Electromechanical (EEE) Parts Program

NMI 5320.7 Basic Policy for Mechanical Parts Control

NMI 5330.2C Quality Status Stamping Requirements

NMI 5330.9B Metrology-Calibration and Measurement Processes

NMI 5350.1A Maintainability and Maintenance Planning Policy

NMI 8010.1A Classification of NASA Payloads

NMI 8010.2A Use of the Metric System of Measurement in NASA Programs

NHB 8060.1C Flammability, Odor, Offgassing and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion

NMI 8070.2B NASA Participation in the Development and Use of Voluntary Standards

NMI 8070.3B Problem Reporting, Corrective Action and Trend Analysis

NMI 8070.4 Risk Management Policy for Manned Flight Programs

NHB 8070.5 Requirements for Significant Problem Reporting and Trend Analysis

NMI 8070.6 Engineering Standards and Practices

NHB 8071.1 Fracture Control Requirements for Payloads Using the National Space Transportation System (NSTS)

NHB 8073.1 NASA Specification for Manufacturing and Performance Requirements of NASA Standard Aerospace Nickel-Cadmium Cells

NMI 8610.13A Mission Critical Space Systems Personnel Reliability Program

NMI 8621.1F Mishap Reporting and investigating

NMI 8710.2A NASA Safety and Health Program

 

Traceability of Baseline Documents to New Documents as Contained in New Document Tree AS OF 11 May 2001

Note: The document listing is current as of the identified date and is subject to additional changes such as name changes, number changes, additions, deletions or combinations of documents.

NMI 1040.3C Emergency Preparedness Program - Converted into NPD 8710.1 Emergency Preparedness Program Policy

NMI 1103.39E Role and Responsibilities - Associate Administrator for Safety and Mission Assurance - was replaced by NHB 1101.3 - NHB 1101.3 was converted into NPG1000.3 (Note: NHB 1101.3 is not an Office of Safety and Mission Assurance document)

NMI 1152.66B NASA Space Flight Safety Panel - Converted into NPC 1152.66C Space Flight Safety Panel Charter - NPC 1152.66C was cancelled upon release of NPG 1000.3

NPC 1152.66C NASA Space Flight Safety Panel Converted from NMI 1152.66B NPC 1152.66C was cancelled upon release of NPG 1000.3

NMI 1152.67A Engineering Management Council - Was transferred to the Chief Engineers Office - No longer contained in the OSMA document tree

NMI 1156.14L Aerospace Safety Advisory Panel - Was updated to NMI 1156.14M - Converted into NPC 1156.14N Aerospace Safety Advisory Panel Charter NPCs will be discontinued in the future and Charter information will then be contained in NHB 1101.3 or its replacement ASAP charter was updated in April 1999 replacing NPC 1156.14N

NMI 1270.2B NASA Quality Policy - Was superseded by NMI 1270.3 NASA Quality Management Policy (ISO 9000) - Converted into NPD 8730.3 - (contains a top-level GIDEP participation requirement and cancels NMI 5310.1E)

NHB 1700.1(V1-B) NASA Safety Policy and Requirements Document - Converted into NPG 8715.3 Safety Manual

NHB 1700.1(V2) Guidelines for Mishap Investigation - Was converted into NPG 8621.1 Mishap Reporting, Investigating and Recordkeeping

NHB 1700.1(V9) NASA Safety Manual - Fire Protection - Was deleted and replaced by a NASA Safety Standard 1740.11 - Subsequently replaced by NASA-STD 8719.11 Fire Protection

NHB 1700.6 Guide for Inservice Inspection of Ground-Based Pressure Vessels and Systems Was re-issued as NPG 1700.6A

NHB 1700.7A Safety Policy and Requirements for Payloads Using the Space Transportation System (STS) - Was deleted, document had been superseded by NSTS program document

NMI 1700.8 Policy for Limiting Orbital Debris Generation - Converted into NPD 8710.3 Policy for Limiting Orbital Debris

NMI 1710.3D Safety Program for Pressure Vessels and Pressurized Systems - Converted into NPD 8710.5 Safety Program for Pressure Vessels and Pressurized Systems

NSS 1740.9 Lifting Devices To be converted into NASA-STD 8719.9

NSS 1740.10 Underwater Facility/Non-Open Water operations To be converted into NASA-STD 8719.10

NSS 1740.11 NASA Safety Standard for Fire Protection Was derived from NHB 1700.1(V9) and was superseded by NASA-STD 8719.11

NSS 1740.12 Explosives Safety To be converted into NASA-STD 8719.12

NSS 1740.15 Oxygen Standard Voluntary Consensus standard being considered for adoption

NSS 1740.16 Hydrogen Standard Development of Voluntary Consensus standard being considered

NMI 2410.10B NASA Software Management, Assurance, and Engineering Policy - Converted into NPD 2820.1 NASA Software Policies

NHB 2710.1 Safety and Health Handbook - Occupational Safety and Health Programs - Converted into NPG 8715.1 Safety and Health Handbook Occupational Safety and Health Programs

NPD 2820.1 NASA Software Policies Was converted from NMI 2410.10B

NHB 5300.4(1A-1) Reliability Program Requirements for Aeronautical and Space System Contractors - Was deleted.

NHB 5300.4(1B) Quality Program Provisions for Aeronautical and Space Systems Contractors - Was deleted.

NHB 5300.4(1C) Inspection System Provisions for Aeronautical and Space System Materials, Parts, Components, and Services - Was deleted.

NHB 5300.4(1D-2) Safety, Reliability, Maintainability, and Quality Provisions for the Space Shuttle Program - Document has been deleted - Replaced by NSTS 5300.4(1D-2)

NHB 5300.4(1E) Maintainability Program Requirements for Space Systems - Was deleted.

NHB 5300.4(1F) Electrical, Electronic, and Electromechanical (EEE) Parts Management and Control Requirements for NASA Space Flight Programs - Was deleted

NHB 5300.4(1G) NASA Assurance Terms and Definitions - Has been deleted Long term plans call for development of a NASA-Standard for definitions

NHB 5300.4(2B-2) Management of Government Quality Assurance Functions for NASA Contracts Was reissued as NPG 5300.4(2B-3) - Was subsequently updated and released as NPG 8735.2 Management of Government Safety and Mission Assurance Surveillance Functions for NASA Contracts

NPG 5300.4(2B-3) Management of Government Quality Assurance Functions for NASA Contracts Was converted from NHB 5300.4(2B-2) Replaced by NPG 8735.2

NHB 5300.4(3A-2) Requirements for Soldered Electrical Connections - Converted into NASA-STD 8739.3 Workmanship Standard for Soldered Electrical Connections.

NHB 5300.4(3G) Requirements for Interconnecting Cables, Harnesses and Wiring - Was converted into NASA Assurance Standard (NASA) 5300.4(3G-1) - Was combined with NHB 5300.4(3H) and was converted into NASA-STD 8739.4

NAS 5300.4(3G-1) Requirements for Interconnecting Cables, Harnesses and Wiring Was converted from NHB 5300.4(3G) Was converted to NASA-STD 8739.4

NHB 5300.4(3H) Requirements for Crimping and Wire Wrap - Converted into NASA-STD 8739.4 Crimping, Interconnecting Cables Harness, and Wiring

NHB 5300.4(3I) Requirements for Printed Wiring Boards - Was deleted. Non-government Standard IPC-RB-276 has been identified as the replacement.

NHB 5300.4(3J) Requirements for Conformal Coating and Staking of Printed Wiring Boards for Electronic Assemblies - Was converted into NASA Assurance Standard 5300.4(3J-1) and was subsequently converted into NASA-STD 8739.1

NAS 5300.4(3J-1) Requirements for Conformal Coating and Staking of Printed Wiring Boards Was converted from NHB 5300.4(3J) Was converted into NASA-STD 8739.1

NHB 5300.4(3K) Design Requirements for Rigid Printed Wiring Boards and Assemblies - Was deleted

NHB 5300.4(3L) Requirements for Electrostatic Discharge Control (Excluding Electrically Initiated Explosive Devices) - Was converted into NASA-STD 8739.7

NAS 5300.4(3M) Workmanship Standard for Surface Mount Technology Was converted into NASA-STD 8739.2

NHB 5300.9 Safety, Reliability and Quality Assurance Provisions for the Office of Aeronautics, Exploration and Technology Centers - Was deleted - Basic information to be covered by Enterprise S&MA Plans

NMI 5310.1D NASA Alert Reporting of Parts, Materials, and Safety Problems - Was replaced by NMI 5310.1E which combined NMI 5310.1D and NMI 5310.2C - Top level GIDEP participation statement included in NPD 8730.3 which canceled NMI 5310.1E

NMI 5310.2C Participation in Government-Industry Data Exchange Program (GIDEP) - Was deleted upon combination with NMI 5310.1E

NHB 5310.3 Procedures for NASA Alert Reporting of Parts, Materials, and Safety Problems - Converted into NPG 8735.1 Alert Reporting

NMI 5320.5C Basic Policy for NASA Space Flight Program Electrical, Electronic, and Electromechanical (EEE) Parts - Converted into NPD 8730.2 NASA Parts Policy which combines parts of NMI 5320.5C, NMI 5320.6B and NMI 5320.7

NMI 5320.6B Implementation of NASA Standard Electrical, Electronic, and Electromechanical (EEE) Parts Program - Converted into NPD 8730.2 NASA Parts Policy which combines parts of NMI 5320.5C, NMI 5320.6B and NMI 5320.7

NMI 5320.7 Basic Policy for Mechanical Parts Control - Converted into NPD 8730.2 NASA Parts Policy which combines parts of NMI 5320.5C, NMI 5320.6B and NMI 5320.7

NMI 5330.2C Quality Status Stamping Requirements - Was deleted

NMI 5330.9B Metrology-Calibration and Measurement Processes - Converted into NPD 8730.1 Metrology and Calibration

NMI 5350.1A Maintainability and Maintenance Planning Policy - Converted into NPD 8720.1 R&M Policy

NPG 7900.3A Aviation Safety Aircraft Operations Management (Chapter 5) - OSMA prepares Chapter 5 of this document but is not responsible for the entire document

NMI 8010.1A Classification of NASA Payloads - Was deleted

NMI 8010.2A Use of the Metric System of Measurement in NASA Programs - Was transferred to the Chief Engineers Office - No longer contained in the OSMA document tree

NHB 8060.1C Flammability, Odor, Offgassing and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion - Was transferred to the Chief Engineers Office - No longer contained in the OSMA document tree

NMI 8070.2B NASA Participation in the Development and Use of Voluntary Standards - Was transferred to the Chief Engineers Office - No longer contained in the OSMA document tree

NMI 8070.3B Problem Reporting, Corrective Action and Trend Analysis - Was deleted

NMI 8070.4 Risk Management Policy for Manned Flight Programs - Was deleted - Portions of the information appear in NPG 7120.5A

NHB 8070.5 Requirements for Significant Problem Reporting and Trend Analysis - Was deleted

NMI 8070.6 Engineering Standards and Practices - Was transferred to the Chief Engineers Office which issued NPD 8070.6A Technical Standards - Establishes policy related to NASA Standards - Document is not OSMA responsibility

NHB 8071.1 Fracture Control Requirements for Payloads Using the National Space Transportation System (NSTS) - Was transferred to the Chief Engineers Office - No longer contained in the OSMA document tree

NHB 8073.1 NASA Specification for Manufacturing and Performance Requirements of NASA Standard Aerospace Nickel-Cadmium Cells - Was transferred to the Chief Engineers Office - No longer contained in the OSMA document tree

NMI 8610.13A Mission Critical Space Systems Personnel Reliability Program - Was deleted

NMI 8621.1F Mishap Reporting and Investigating Converted into NPD 8621.1G

NPD 8621.1G Mishap Reporting and Investigating Converted from NMI 8621.1F

NPD 8700.1 NASA Policy for Safety and Mission Success - New

NPD 8700.TBD ELV CoFR Process To be developed

NPC 8701.1 OEB (Operations and Engineering Board) Charter New Cancelled upon release of NPG 1000.3 which now includes Charter information

NPG 8705.TBD Risk Management Under NODIS review

NASA-STD 8709.2 S&MA Roles and Responsibilities for ELV Services New

NPD 8710.1 Emergency Preparedness Program Policy - Was converted from NMI 1040.3C

NMI 8710.2A NASA Safety and Health Program - Converted to NPD 8710.2B

NPD 8710.2B NASA Safety and Health Program Converted from NMI 8710.2A

NPD 8710.3 Policy for Limiting Orbital Debris Was converted from NMI 1700.8

NPD 8710.5 Safety Program for Pressure Vessels and Pressurized Systems Was converted from NMI 1710.3D

NPG 8715.1 Safety and Health Handbook Occupational Safety and Health Programs Was converted from NHB 2710.1

NPG 8715.2 Emergency Preparedness Plan - New, provides additional details not contained in NPD 8710.1 Emergency Preparedness Program Policy

NPG 8715.3 Safety Manual - Converted from NHB 1700.1(V1-B)

NASA-STD 8719.7 Facilities Safety Guide - New

NASA-STD 8719.8 ELV, Payload Safety/Reliability Processes Standard - New

NASA-STD 8719.9 Lifting Devices Will be a conversion of NASA Safety Standard 1740.9 Lifting Devices

NASA-STD 8719.10 Underwater Facility/Non-Open Water Operations Will be a conversion of NASA Safety Standard 1740.10

NASA-STD 8719.11 Safety Standard for Fire Protection Was converted from NSS 1740.11

NASA-STD 8719.12 Explosives Safety Will be a conversion of NASA Safety Standard 1740.12 Explosives Safety Standard

NASA-STD 8719.13A Software Safety Standard - New

NASA-STD 8719.14 Orbital Debris Manual - New, additional information to support implementation of NPD 8710.3 Policy for Limiting Orbital Debris

NASA-STD 8719.15 Oxygen Standard Will be a conversion of NASA Safety Standard 1740.15 Hydrogen and Oxygen Standards if a Voluntary Consensus Standard is not adopted

NASA-STD 8719.16 Hydrogen Standard Will be a conversion of NASA Safety Standard 1740.15 Hydrogen and Oxygen Standards if a Voluntary Consensus Standard is not adopted

NPD 8720.1 R&M Policy Was converted from NMI 5350.1A

NASA-STD 8729.1 R&M Program Planning New

NPD 8730.1 Metrology and Calibration Was converted from NMI 5330.9B

NPD 8730.3 NASA Quality Management Policy (ISO9000) - Was converted from NMI 1270.3

NPD 8730.TBD NASA Engineering and Quality Audit (NEQA) Policy To be developed

NPG 8735.1 Procedures for Exchanging Parts, Material and Safety Data Using GIDEP and NASA Advisories Was converted from NHB 5310.3

NPG 8735.2 Management of Government Quality Assurance Functions for NASA Contracts Converted from NPG 5300.4(2B-3)

NPG 8735.TBD NEQA Requirements To be developed

NASA-STD 8739.1 Conformal Coating and Staking of Printed Wiring Boards Was converted from NASA Assurance Standard 5300.4(3J-1)

NASA-STD 8739.2 Workmanship Standard for Surface Mount Technology Was converted from NASA Assurance Standard 5300.4(3M)

NASA-STD 8739.3 Workmanship Standard for Soldered Electrical Connections Was converted from NHB 5300.4(3A-2)

NASA-STD 8739.4 Crimping, Interconnecting Cables Harness, and Wiring Was converted from NHB 5300.4(3H) and NASA Assurance Standard 5300.4(3G-1)

NASA-STD 8739.5 Workmanship Standard for Fiber Optic Terminations, Cable Assemblies and Installations - New

NASA-STD 8739.7 Electrostatic Discharge Control (Excluding Electrically Initiated Explosive Devices) Was converted from NHB 5300.4(3L)

RG QS-ASO-92-001 Aviation Safety Officer Guide - Existing tutorial/guide to assist Aviation Safety Officers in the performance of their duties - it has not yet been determined if this needs to be converted into another format


This page was last updated on November 1, 2004
Responsible NASA official: Terrence W. Wilcutt
Curator: Bill Loewy / OSMA